| PART |
Description |
Maker |
| ABSM208 |
MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL
|
Abracon Corporation
|
| ABS15 |
LOW PROFILE, 32.768kHz CRYSTALS MOLDED PLASTIC SURFACE MOUNT
|
Abracon Corporation
|
| KBL4005 |
Reliable low cost construction utilizing molded plastic technique
|
Sangdest Microelectroni...
|
| MO1812 MO1812-681M MO1812-682K MO1812-683K MO1812- |
Plastic Molded Inductor High L (1μH-330μH)
Plastic Moulded Inductor High L
|
PREMO CORPORATION S.L
|
| HLS624-473TT HLS640-473TT HLS628-473TT HLS628-473T |
24 POS MOLDED DIP SOCKET DIP24, IC SOCKET
40 POS MOLDED DIP SOCKET DIP40, IC SOCKET
28 POS MOLDED DIP SOCKET DIP28, IC SOCKET
32 POS MOLDED DIP SOCKET DIP32, IC SOCKET
16 POS MOLDED DIP SOCKET DIP16, IC SOCKET
20 POS MOLDED DIP SOCKET DIP20, IC SOCKET
|
Advanced Interconnections, Corp.
|
| DS624-03TG DS318-30TG DS318-02GG DS314-30TG DS314- |
24 POS MOLDED DIP SOCKET DIP24, IC SOCKET
18 POS MOLDED DIP SOCKET DIP18, IC SOCKET
14 POS MOLDED DIP SOCKET DIP14, IC SOCKET
28 POS MOLDED DIP SOCKET DIP28, IC SOCKET
20 POS MOLDED DIP SOCKET DIP20, IC SOCKET
40 POS MOLDED DIP SOCKET DIP40, IC SOCKET
|
Advanced Interconnections, Corp.
|
| IR928-6C |
EVERLIGHTs Infrared Emitting Diode IR928-6C is a high intensity diode , molded in a water clear plastic package.
|
List of Unclassifed Manufacturers
Everlight Electronics
Electronic Theatre Controls, Inc.
|
| T323A474J035AS-C T323A474J035AT-C T323A474K035AS-C |
TANTALUM MOLDED
DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings on pages 44-48. See Application Notes Section, page 76 for addi-tional
PERFORMANCE CHARACTERISTICS
TANTALUM MOLDED / AXIAL ?MIL-PRF-49137/1&5
TANTALUM MOLDED / AXIAL . MIL-PRF-49137/1&5
|
Kemet Corporation
|
| LPP-100-13.5 LPP-100-12 LPP-100-48 LPP-100-27 LPP- |
CHOKE,AXIAL,MOLDED RF,0.15uH, 10% INDUCTIVE TOL,1100 IDC
100W Single Output with PFC Function
CHOKE,AXIAL,MOLDED RF,0.56uH, 10% INDUCTIVE TOL,495 IDC
CHOKE,AXIAL,MOLDED RF,0.47uH, 10% INDUCTIVE TOL,590 IDC
CHOKE,AXIAL,MOLDED RF,0.39uH, 10% INDUCTIVE TOL,640 IDC
|
Astrodyne, Inc.
|
| IMCH-1812 |
Surface Mount, High Current Molded Inductors
Surface Mount, Molded Inductors
SMD High-current molded Inductor;
up to IDC = 1 Amp; up to 330 µH;
|
Vishay Intertechnology,Inc.
|
| 1N4819 1N4816 20D8 10D05 10D1 10D10 10D2 10D4 10D6 |
1.5 AND 2.0 AMP MOLDED SILICON RECTIFIER DIODES
V(rrm): 700V; 1.5A molded silicon rectifier diode
From old datasheet system
1.5 AND 2.0 AMP MOLDED SILICON RECTIFIER DIODES 1.5.0安培成型一般整流二极管
V(rrm): 600V; 1.5A molded silicon rectifier diode
V(rrm): 800V; 1.5A molded silicon rectifier diode
|
IRF[International Rectifier]
International Rectifier, Corp.
|
| IMC-1210-SY-10N-M-100 IMC-1210-100 |
Molded, Wirewound Inductor. Tested at 100KHz
Surface Mount, Molded Inductor 表面贴装，模压电
|
Vishay Siliconix
Vishay Intertechnology,Inc.
Vishay Intertechnology, Inc.
|
